Technical data:
- Load: up to 1 kg/ 3cm2
- Temperature resistance: 10 ~ 40°C
- Elongation at break: 300%
- Peeling strength: 8,5~14,5 N/cm
- Adhesion to materials: flat and non-porous material - marble, glass, tile, metal, plastic etc.
- Material: gel PU (nano technology acrylic adhesive)
- Thickness: 2 mm
- Width: 30 mm
- Length: 3 m
- Weight: 210 g
- Color: transparent
Main features:
- Durable, washable, reusable tape
- Weather, ozone, humidity, water immersion resistance
- Leaves no residue after removal and does not damage the surfaces
- Wide application
INSTRUCTIONS:
- Measure the cut the tape to desired size. Cut only one strip at a time.
- Place tape on the surface with adhesive side down and press down. Use plenty of tape to cover the surface (e.g. when using on picture frame, stick the tape to all sides of the frame).
- Peel off backing to expose the double stick side.
- Place on the surface it should be sticked to. IMPORTANT: Firmly press against all areas for 15-30 seconds to help adhere.
- To remove the tape, simply pull by the edge.
The tape has a plastic spacer that must be removed before application.
For best results, clean both surfaces prior to application. Use a glass cleaner, if applying on glass or stainless steel surfaces. Make sure the surface is flat, dry and free of dirt and oil.
If using on painted surfaces, application will be permanent. Removing the magic nano tape may cause paint to peel.
Tip: To help remove the tape from the painted surface, spray water on the tape′s edges to avoid damage to the surface.